Advertisement
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Torx Driver
Flat head screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
System Board Battery - Remove the top cover and locate the battery on the system board.
2.
Power Supply- Remove power supply cover. Locate capacitor and remove by prying with flat blade screw driver
3.
Dispose of properly
4.
.
5.
6.
7.
8.
9.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
No
No
PSG instructions for this template are available at
EL-MF877-01
0
0
Tool Size (if
applicable)
T-15
Midium
Page 2
Advertisement
