KP230_GreeceUK_VDF_080421
Settings
GPRS attach
You can set GPRS service depending
on various situations.
]
Power on
If you select this menu, the phone is
automatically registered to a GPRS
network when you switch the phone
on. Starting a WAP or PC dial-up
application creates the connection
between phone and network and
data transfer is possible. When you
end the application, GPRS
connection is ended but the
registration to the GPRS network
remains.
]
When needed
If you select this menu, the GPRS
connection is established when you
connect a WAP or application
service and closed when you end
the WAP or applicaion connection.
Access points
]
View: You can see the selected
profile.
60
2008.4.21
2:48 PM
]
New access point
• Name: You can type the network
name.
• Bearer: You can set the bearer
data service. - GPRS
<GPRS settings>
The service settings are only
available when GPRS is chosen as a
bearer service.
- APN: Input the APN of the GPRS.
- User ID: The users identify for
your APN server.
- Password: The password required
by your APN server.
- Primary server: Input the IP
address of the primary DNS server
you access.
- Secondary server: Input the IP
address of the secondary DNS
server you access.
GPRS information
You can check the call time and data
volume by GPRS.
Page 60