Site Selection
SITE SELECTION:
Ceiling mounted (DIR15A10GR, DIR18A10GR).
WARNING: DIR22A10GR CANNOT be ceiling-mounted.
Inclined ceiling-mount
Correct Installation
WARNING:
never be installed in the upwards or
inwards facing position, the heating
surface must always be positioned
to direct the heat in a downwards or
outwards direction.
WARNING:
heater vertically. Failure to follow
these instructions can cause the
heating element within the tube to
sag and cause premature burnout.
10
CEILING
The heater must
DO NOT install the
Horizontal ceiling-mount
Incorrect Installation
CEILING
Clearances
To ensure that all minimum
clearances are achieved please refer
to the diagrams on page 11.
Angled horizontal ceiling-mount
www.dimplex.com
CEILING