Use - IKEA BALANSERAD Manual

ENGLISH
WARNING: if no plug is fitted
(direct wiring to the mains), or
if the socket is not located in an
accessible place, a qualified
electrician should install a

Use

The hood has been designed to be
installed and used either as a "Extraction
installation", or as a "Recirculation
installation".
Extraction installation (see symbol
in installation booklet)
Cooking steam is sucked and channelled
outside the house through a discharge duct
(not supplied), fitted to the hood steam
outlet.
Ensure that the discharge duct is correctly
fitted to the air outlet, unit using an
appropriate connection system.
Important: If already installed, remove the
charcoal filter/s.
Recirculation installation
(see symbol
The air is filtered through one or more the
charcoal filters, and then resent into room.
in installation booklet)
standardised double pole power
switch that will enable complete
isolation from the mains in case of
category III overvoltage conditions,
in accordance with wiring rules.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied without
charcoal filters, these must be fitted before
the hood can be used. Filters are available
in IKEA shops.
The hood should be installed away from
particularly dirty areas, windows, doors and
heat sources.
The accessories for wall fixing are not
included because walls made of different
materials require different types of fixing
accessories. Use fixing systems suitable for
the walls of your home and the weight of
the appliance. For more details, contact a
specialized dealer.
Keep this booklet for future consultation.
7