Tidying Cables - LG 47LM6400 Owner's Manual

22 ASSEMBLING AND PREPARING
CAUTION
• Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
• If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
• Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
• Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
• Use the screws that are listed on the VESA
standard screw specifications.
• The wall mount kit includes an installation
manual and necessary parts.
• The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
• The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
• For more information, refer to the manual
supplied with the wall mount.
• Only 42LM6690、47/55LM6700
- In order to protect the TV screen(scratch,
fingerprint), put TV on flat table without
removing wrapping bag.
- After removing the wrapping bag on the
back of the TV, install TV according to manu-
al included in wall mounting bracket product.
- Remove protection pads after installing TV.

Tidying cables

(Only 32/42LM6690)
1. Gather and bind the cables with the cable
holder.
CAUTION
Do not move the TV by holding the cable
holder , as the cable holders may break,
and injuries and damage to the TV may
occur.
(Only 42/47LM6400、47/55LM6700)
1. Gather and bind the cables with the Cable
Management.
2. Fix the Cable Mangement firmly to the TV.
CAUTION
Do not move the TV by holding the cable
holder, as the cable holders may break,
and injuries and damage to the TV may
occur.
Cable holder
Cable Holder
Cable Management