Playback; Connecting With Other Equipment For Playback; Playback With An Analog Audio Equipment; Playback With An Audio Equipment With Digital Input - Sony TCD-D8 Operating Instructions (primary manual) Operating Instructions Manual

( Playback

Connecting with Other Equipment for
Playback
You can connect the tape-corder to other analog audio equipment and audio
equipment with digital output. Refer to page 12 for "Playing Back".
Tip
The output level of the
PHONES/LINE OUT jack
and the REMOTE
DIGITAL I/O jack is
fixed. The volume cannot
be adjusted with the
VOLUME buttons of this
tape-corder.
Note
When a plug is connected
to the PHONES/LINE
OUT jack, the tape-corder
cannot change the output
mode from LINE OUT to
PHONES (AVLS) during
playback although you
can set the PHONES
(AVLS)/LINE OUT
switch to PHONES
(AVLS), vice versa.

Playback with an analog audio equipment

(Analog connection)
Audio connecting cable
(not supplied)
PHONES/LINE OUT
1
Set the PHONES (AVLS)/LINE OUT switch to
LINE OUT.
2
Begin playback and adjust the volume of the
connected equipment.
Playback with an audio equipment with
digital input (Digital connection)
Optical cable
(not supplied)
To REMOTE DIGITAL I/O
Connect the digital audio equipment to this tape-
corder as shown. Begin playback and adjust the
volume of the connected equipment.
Stereo unit
or radio
cassette
recorder, etc.
To LINE IN
DAT deck,
digital
amplifier,
etc.
Playback
23 EN