Conformity; Exemption From Liability - Flex SPR 18.0 Original Operating Instructions

conformity

We declare on our sole responsibility that the
product described under "Technical data"
conforms to the following standards or
normative documents:
1999/005/EC (until 12.06.16),
2014/53/EU (from 13.06.16).
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle Klaus Peter Weinper
Manager Research &
Head of Quality
Development (R & D)
Department (QD)
17.12.2015
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
20

Exemption from liability

The manufacturer and his representative are
not liable for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product. The manufacturer
and his representative are not liable for any
damage which was caused by improper use
of the power tool or by use of the power tool
with products from other manufacturers.
SPR 18.0