Technical Features And Models - Ormesa Juditta B30 Use And Maintenance Handbook

TECHNICAL FEATURES and MODELS

JUDITTA is available in 3 models:
JUDITTA B30 (tilt-in-space): with 20 cm front solid swiveling wheels and 30
•
cm rear wheels; drum brakes are operated by a single control pedal.
JUDITTA B12 (tilt-in-space): with four 12cm solid swiveling wheels, the rear
•
ones with brakes
JUDITTA B60 (tilt-in-space): with 20 cm. front solid wheels and 56 cm.
•
rear pneumatic wheels with hand brake and anti-tip device
- FRAME made of chromed steel, painted with non-toxic epoxy powder paint. Narrow
base to facilitate entering elevators
- SEAT : adjustable inclination from 10° to 35°; available in four widths (36, 40, 45 and
50 cm); inclined by 10° to prevent the user sliding forward.
- HEADREST wide and wrap-around, padded, height-adjustable, with vertical and front-
back rotation, and lateral translation.
- BACKREST wide and retentive, can be adjusted in four positions to vary the depth of
the seat bottom
- SEAT low, to facilitate the user getting on and off
- GAS SPRING to adjust the inclination of the seat and backrest. The gas spring is a
mechanism that supports the patient's weight during the adjustments of the
backrest and of the seat tilting, with the following advantages: a) IT REDUCES THE
ASSISTANT'S EFFORT IN RAISING AND LOWERING SIGNIFICANTLY; b)
GUARANTEES
UNBALANCING THE PATIENT DURING ADJUSTMENT; c) ALLOWS STOPPING
THE INCLINATION WHEREVER DESIRED
- UPHOLSTERY fireproof, breathable and removable for machine washing
- SIDES, closed, they can be opened to facilitate the user getting on and off
- ARMRESTS padded and height-adjustable
- SIDE PROTECTIONS padded for the knees
- FOOTRESTS removable, and height-adjustable
- LEG SUPPORTS REMOVABLE, tilt- and tilt adjustable. They can be turned sideways
to help the operator get close, the user get on and off. It is provided with padded
calfrests
UNIFORM MOVEMENT WITHOUT
19/86
JERKING AND AVOIDS