Ormesa Juditta B30 Use And Maintenance Handbook page 17

3) CORRECT POSITIONING OF THE OCCUPANT BELT RESTRAINTS ON
THE USER
ATTENTION! The pelvic belt restraint should be worn low across the front of the pelvis, so that
the angle of the pelvic belt restraint is within the preferred zone of 30° to 75° to the horizontal
(see fig. 3). A steeper (greater) angle within the preferred zone is desirable
ATTENTION! Postural belts such as 828 are not intended to be as an occupant restraint
in a moving,but they can be used in addition
YES
beneath
the armrest
and the
frame
NO
above
the armres
and the
frame
THE INCORRECT PLACEMENT OF BELT RESTRAINTS
FRONT VIEW
FRONT VIEW
SIDE VIEW
SIDE VIEW
15/86