Download Print this page

Joranalogue Transmit 2 User Manual

Stereo balanced line outputs

Advertisement

Quick Links

INTRODUCTION
Whether it's in the studio or on a live stage,
keeping
audio
interconnections
unwanted hum and interference can be a
challenge. Balanced lines are the proven solution
to this problem.
Conventional balanced output solutions often
rely on transformers providing galvanic isolation
to
mitigate
the
effects
Unfortunately, these components are bulky,
expensive
and
colour
unfavourably, especially in the low end).
Instead, Transmit 2 (or TX2 for short) takes a fully
solid-state approach. Offering a stereo pair of XLR
balanced outputs, it ensures that the sonic clarity
of your carefully planned modular system is not
lost in its interface to the outside world.
Eengineered to provide massive headroom while
retaining extremely low noise and distortion,
Transmit 2's
circuitry
impedance design practices, radio-frequency
(RF) filtering and premium balanced drivers to
provide
transformer-like
performance in a compact and affordable
module. And thanks to the electrostatic (ESD)
and phantom power discharge protection, it's
rugged enough to survive the rigours of
performing on the road.
Adjusting the main output level is a breeze
thanks to the dual peak-responding LED meters.
A high-end headphone amplifier is included as
well, controlled by a separate level knob. It can
deliver the voltage and current required to
power practically any headphones, regardless of
the impedance or driver technology. This 3.5 mm
stereo socket can function as an auxiliary stereo
line output or even drive small passive speakers,
making Transmit 2 an all-round flexible answer
to all your output needs.
free
from
of
ground
loops.
the
sound
(often
incorporates
low-
interconnect
STEREO BALANCED LINE OUTPUTS
CONTENTS
In the Transmit 2 box, you'll find:
 Product card, stating serial number and
production batch.
 16-to-10-pin Eurorack power cable.
 Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
 And finally, the module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or support@joranalogue.com.
1
TRANSMIT 2

Advertisement

loading

Summary of Contents for Joranalogue Transmit 2

  • Page 1 If any of these items are missing, please contact unfavourably, especially in the low end). your dealer or support@joranalogue.com. Instead, Transmit 2 (or TX2 for short) takes a fully solid-state approach. Offering a stereo pair of XLR balanced outputs, it ensures that the sonic clarity of your carefully planned modular system is not lost in its interface to the outside world.
  • Page 2: Controls And Connections

    2 HEADPHONES OUTPUT Headphones can be plugged in here. Thanks to the extremely low output impedance and high current drive capability, Transmit 2 delivers outstanding performance driving a variety of headphones. This socket can also be used as an auxiliary stereo line output.
  • Page 3: Signal Inputs

    XLR sockets, but typically have too much gain to accept line level signals. Transmit 2 can also drive single-ended inputs if needed, for example when using XLR to mono jack cables. It will do so without the 6 dB level...
  • Page 4: Specifications

    MODULE FORMAT As all Joranalogue Audio Design products, Doepfer A-100 ‘Eurorack’ compatible module Transmit 2 is designed, manufactured and tested 3 U, 6 HP, 45 mm deep (inc. power cable) with the highest standards, to provide the Milled 2 mm aluminium front panel with non-...
  • Page 5 With compliments to the following fine people, who helped to make Transmit 2 a reality! Ben ‘DivKid’ Wilson Björn Jauss Boris Uytterhaegen Gregory Delabelle Jan D’Hooghe Jens Van Daele Lieven Stockx Sebastiaan Tulkens Everyone at Wired Electronics Transmit 2 User Manual version 2019-03-07 Century Analogue Synthesis—Made in Belgium...