Controls And Connections; Led Meters; Headphones Output - Joranalogue Transmit 2 User Manual

CONTROLS & CONNECTIONS

1 LED METERS

The peak-responding LED bar meters give a
visual indication of the output levels on the main
XLR outputs. The scale ranges from −18 to +6 dB,
with 0 dB corresponding to the +4 dBu nominal
level common in professional audio systems.

2 HEADPHONES OUTPUT

Headphones can be plugged in here. Thanks to
the extremely low output impedance and high
current drive capability, Transmit 2 delivers
outstanding performance driving a variety of
headphones. This socket can also be used as an
auxiliary stereo line output.
Take care not to plug in a mono cable, as this will
short out the right channel. The headphone
amplifier is short-circuit
damage will occur,
unnecessary current from the power supply.
Since the headphone amplifier is completely
separated from the
overloading it will not affect the main output
signal integrity.
3 HEADPHONE LEVEL KNOB
Adjust the output level of the headphone
amplifier using this knob. The range is −∞ to 0 dB
(unity gain), so high-impedance headphones,
which require relatively high voltage levels, can
be driven with ease.
CAUTION: listening at high sound pressure
!
levels (SPLs) for extended time can cause
permanent hearing damage!
Always start listening with the level knob set to
minimum, and slowly turn it up until you reach a
comfortable level. The loudness range of the
knob will vary greatly depending on the
impedance and sensitivity of the headphones
used.
protected, so no
but this will draw
main XLR outputs,
STEREO BALANCED LINE OUTPUTS
2
TRANSMIT 2