Moving Recorded Tracks - Sony MZ-R500 Analog PCLink Operating Instructions Manual

2
Find the track mark by pressing .
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
"MK 003" appears in the display for
2 seconds.
3
Press T MARK to erase the mark.
"MK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, name assigned to
the mark is also erased.
Notes
• You cannot erase a track mark that has been
written between track marks recorded in
different recording mode, If you try to erase
such a track mark, "SORRY" appears in the
display.
• You cannot erase a track mark that has been
written between a track recorded through a
digital connection and a track recorded
through an analog connection. If you try to
erase such a track mark, "SORRY" appears in
the display.

Moving recorded tracks

You can change the order of the recorded
tracks.
Example
Move track C from the third to the second
track
Before moving
A B
A C
After moving
>MENU.
1
While playing the track you want to
move, press ENTER, press
>MENU. repeatedly until
"EDIT" flashes in the display, and
then press ENTER again.
" " and "Name" flash in the
display and the recorder plays the
selected track repeatedly.
2
Press >MENU. repeatedly
until " " and "Move" flash in the
display, and then press ENTER.
For the example above, "003 t" and
"t 003" appear alternately in the
display.
3
Press >MENU. to select the
destination track number.
For the example above, "003 t" and
"t 002" appears in the display.
To cancel moving, press x.
C D
B D
x
ENTER
continued
27
-GB