Beko BCT9031G User Manual page 21

Error messages
Table-2: Error codes and error causes
m
For further information about error messages
hat may appear on the touch control panel,
see Table-2. If Fx and Ex errors remain
uncorrected, call for Authorized Service.
If the surface of the touch control panel is
subjected to vapor, entire control system will
_ _ ,_,be deactivated, a signal sound will be heard
and "E" will flash on the display.
Keep the surface of the touch control panel
clean. It may give erroneous operation
No pots/pans must be placed on the touch
control panel.
21/EN