Beko BCT9031G User Manual page 20

2. Touch "Ii" key again to restart all stopped cooking
zones with previous settin s.
• hen the stop key is pressed,
"□"
I
symbol will appear on the displays of the
cooking zones which were active before
this key is pressed.
Using the induction cooking zones safely and
effectively
Operating principles: Induction hob heats directly the
cooking vessel as a feature of its operating principles.
Therefore, it has various advantages when compared
to other hob types. It operates more efficiently and the
hob surface does not heat up.
Your induction hob is equipped with superior safety
systems that will provide you maximum safe usage.
our hob can be equipped with induction
cooking zones with a diameter of 145, 180,
21 0 and 280 mm depending on the model.
Each cooking zone automatically detects the
vessel placed on it thanks to the induction
feature. Energy builds up only where the
vessel contacts with the cooking zone and
thus, minimum energy consumption is
achieved.
Operation time limits
The hob control is equipped with an operation time
limit. When one or more cooking zones are left on, the
cooking zone will automatically be deactivated after a
certain period of time (see, Table-1). If there is a timer
assigned to the cooking zone, the timer display will
also turn off later.
Operation time limit depends on the selected
temperature level. Maximum operation time is applied
at this temperature level.
The cooking zone may be restarted by the user after it
is turned off automatically as described above.
Table-1: Operation time limits
20/EN
Overheating protection
Your hob is equipped with some sensors ensuring
protection against overheating. Following may be
observed in case of overheating:
• Active cooking zone may be turned off.
• Selected level may drop. However, this condition
cannot be seen on the indicator.
Overflow safety system
Your hob is equipped with overflow safety system. If
there is any overflow that spills onto the control panel,
the system will cut the power connection immediately
and switch off your hob.
"E"
warning appears on the
indicator during this period.
Precise power setting
Induction hob reacts to commands immediately as a
feature of its operating principles. It changes the
power settings very fast. Thus, you can prevent a
cooking pot (containing water, milk and etc.) from
overflowing even if it was just about to overflow.
Noisy operation
Some noises may arise from the induction hob. These
sounds are normal and a part of induction cooking.
• Sound becomes prominent in high temperature
levels.
• Alloy of the cooking pot can cause noise.
• In low levels, a regular on/off sound can be
heard because of the operating principles.
• Noise can be heard if an empty cooking pot is
heated. When you put water or meal in it, this
sound will go away.
• The noise of the fan that cools the electronic
system can be heard.