Midi Settings On Keyboard - Yamaha Tyros Series Manual

6.1 MIDI Settings on keyboard

In order to control SongBook+ using these small MIDI files, the keyboard must be configured
accordingly.
We assume here that the MIDI channel 1 is used to control SongBook+ and that the iPad is
connected to PORT 1 (MIDI A/USB 1/WLAN). If you want to use another MIDI channel or
another port, you need to specify it where needed.
1. Press the FUNCTION button on the keyboard,
then select the MIDI tab, then press EDIT to
enter into the MIDI Setup.
3. Configure for SONG
CH1 the target
PORT 1 CH1 and set a
checkmark at CC and PC.
4. For stable use, you should not send any unnecessary
MIDI signals to the port where SongBook+ is connected.
Therefore you should set all others to OFF.
But at least you must avoid sending any other Control
Changes (CC) or Program Changes (PC) to the iPad on the
channel that is used to control SongBook+.
Tip:
Save the MIDI settings in the USER section e.g. with the
name SONGBOOK+.
Page 14
2. Select the TRANSMIT
tab.