Midi Settings On Keyboard - Yamaha Tyros Series Manual

5.2 MIDI settings on keyboard

In order to select the registration by MIDI commands from SongBook+, the keyboard needs
some corresponding MIDI settings.
We assume here that the MIDI channel 1 is used to control the keyboard and that the iPad is
connected to PORT 1 (MIDI A/USB 1/WLAN). If you want to use another MIDI channel or
another PORT, you need to specify it as needed.
1. Press the FUNCTION button on the keyboard,
then select the MIDI tab, then press EDIT to
enter into the MIDI Setup.
3. Select at PORT 1 CH1
the part KEYBOARD
5. For stable use, you should not send any unnecessary
MIDI signals to the port where SongBook+ is connected.
Therefore you should set all to OFF.
But at least you must avoid sending any other Control
Changes (CC) or Program Changes (PC) to the iPad on
channel 1 that is used to remote control SongBook+.
Page 11
2. Select the RECEIVE
tab.
4. Select the TRANSMIT
tab
Tip:
Save the MIDI
settings in the USER
section e.g. with the
name SONGBOOK+.