Specifications - Milwaukee M18 2676-20 Operator's Manual

additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
KNOCKOUT TOOL
• Use tool only as directed. Only trained personnel
should operate tool.
• Do not use in or near live electrical panels. Only
work on de-energized electrical panels. Disconnect all
electrical current before use to avoid the risk of electric
shock.
• Keep hands away from knockout die and punch while
tool is in use. Fingers could be crushed or severed.
• To reduce the risk of injury, wear safety goggles or
glasses with side shields. Before use, inspect and
discard workpieces and accessories with cracks
or damage. Shards from weakened metal could cause
injury.
• Avoid contact with punched metal edges. Edges
may be sharp and could cause injury.
• Do not attempt to punch through more than one
layer of material at a time. Punching through multiple
layers could cause the material and accessories to
warp break, throwing shards that could cause injury.
• Use tool only with knockout dies and punches
rated for the peak output force of this tool. Other
uses may cause injury or damage to the tool, acces-
sories, and workpiece.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
FUNCTIONAL DESCRIPTION
5
9
10

SPECIFICATIONS

Cat. No. ..................................................... 2676-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Peak Output Force ..................................... 10 Tons
Material Capacities *..............12 ga Stainless Steel
3
1
2
3
4
1. Release button
2. LED
3. Trigger
6
4. Lock button
5. Piston
6. Coupler
7. Quick Connect
7
anvil assembly
8. Quick Connect
8
sleeve
9. Rapid Reset ball
pull
10. Rapid Reset draw
11
stud
11. Ball pull
12. Draw stud
13. Die
12
14. Punch
13
14
10 ga Mild Steel
*See chart on back of manual