Power Source Connection - Konica Minolta Accurio Label 190 Safety Information Manual

2.1 Warnings and Precautions for Main Body
2.1.1

Power Source Connection

Do not use any power cord other than the one supplied in the
package or attached on the products. If a power cord is not
supplied, use only the power cord and plug that are specified
in the user documentation. Failure to use this cord could re-
sult in a fire or electrical shock. If the power cord supplied in
the package cannot be used in the country where this prod-
uct was sold, use a power cord that meets the following con-
ditions or contact your Technical Representative.
• The power cord has voltage and current rating appropri-
ate for the rating plate on this machine.
• The power cord meets regulatory requirements for the ar-
ea.
• The power cord is provided with grounding pin/terminal.
Do not use the power cord to other products.
Failure to do that could result in a fire or electrical shock.
Do not scratch, abrade, place a heavy object on, heat, twist,
bend, step on, pull on, or damage the power cord. Use of a
damaged power cord (exposed core wire, broken wire, etc.)
could result in a fire or breakdown.
Should any of these conditions be found, immediately turn
OFF the power switch, unplug the power cord from the pow-
er outlet, and then call your authorized service representa-
tive.
Do not use the power source voltage other than being spec-
ified on the machine. Failure to do that could result in a fire or
electrical shock.
Do not use a multiple outlet adapter to connect any other ap-
pliances or machines. Use of a power outlet for more than the
marked current value could result in a fire or electrical shock.
Do not use an extension cord. Use of an extension cord could
cause a fire or electric shock. If the power cord furnished with
the product is not long enough to be plugged into a wall out-
let, contact your Technical Representative.
Do not unplug and plug in the power cord with a wet hand,
as an electrical shock could result.
Plug the power cord all the way into the power outlet. Failure
to do this could result in a fire or electrical shock.
Make sure to ground this product.(Connect the power cord
to an electrical outlet that is equipped with a grounding ter-
minal.) Failure to do so and an unlikely event of leakage could
result in a fire or electrical shock.
Accurio Label 190/bizhub PRESS C71cf
2
2-3