Table of Contents
Advertisement
2. Safety
2.1 General
Most work-related accidents are caused by failure
to observe basic safety rules or precautions. An
accident can often be avoided by recognizing
potentially hazardous situations before an accident
occurs. As you operate and maintain the wheel rake
you must be alert to potential hazards. You should
also have the necessary training, skills, and tools to
perform any assembly procedure.
Improper operation or maintenance of this unit could
cause a dangerous situation that results in injury or
death.
Do not use this unit until you read and understand
the information contained in this manual. Do not use
the wheel rake for anything other than its intended
purpose.
Do not use the wheel rake until you
read and understand the information
contained in this manual.
Safety precautions and warnings are provided
in this manual and on the unit. If these hazard
warnings are not followed, bodily injury or death
could occur to you or other persons.
Ogden Metalworks cannot anticipate every
possible circumstance that might involve
a potential hazard. The warnings in this
manual and on the product are, therefore,
not all‑inclusive. If a method of operation not
specifically recommended by us is used, you
must satisfy yourself that it is safe for you and
others. You should also ensure that the unit
will not be damaged or be made unsafe by the
methods that you choose.
The information, specifications, and illustrations in
this manual are based on the information that was
available at the time this material was written and
can change at any time.
Hay Runner™ Hay Rake
2.2 Safety Alert Symbol
This is the safety alert symbol. It is used
to alert you to potential personal injury
hazards. Obey all safety messages that
follow this symbol to avoid possible injury
or death.
This manual contains DANGERS, WARNINGS,
CAUTIONS, IMPORTANT NOTICES, and NOTES
which must be followed to prevent the possibility
of improper service, damage to the equipment,
personal injury, or death. The following keywords
call the readers attention to potential hazards.
Hazards are identified by the "Safety Alert Symbol"
and followed by a signal word such as "DANGER",
"WARNING", or "CAUTION".
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury. This signal word is limited to the
most extreme situations.
WARNING
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE
Indicates that equipment or property damage can
result if instructions are not followed.
SAFETY
INSTRUCTIONS
Safety instructions (or equivalent) signs
indicate specific safety-related instructions or
procedures.
Note: Contains additional information important to a
procedure.
5
Ogden Metalworks, Inc. — 217-582-2552
Advertisement
Table of Contents
