Setting Up; Choosing The Power Sources - Sony CFD-S20CP Marketing Operating Instructions Manual

Setting Up

Choosing the power sources

You can use the mains or batteries as a power source.
3
Battery
compartment
1
Connecting the mains lead
Insert one end of the supplied mains
lead to the AC IN socket located at the
rear of the player, and the other end to
the mains.
Changing the MW tuning interval
If you need to change the MW tuning
interval, do the following:
1 Press RADIO BAND•AUTO PRESET
until "MW" is displayed.
2 Press DISPLAY•ENT•MEMORY for 2
seconds.
3 Press RADIO BAND•AUTO PRESET for
2 seconds.
"MW 9" or "MW 10" flashes.
4 Press TUNE + or – to select "MW 9" for 9
kHz interval or "MW 10" for 10 kHz
interval.
5 Press DISPLAY•ENT•MEMORY.
After changing the tuning interval, you need
to reset your preset MW radio stations.
AC IN
1
to the mains
2
Preparing the remote
Insert two R6 (size AA) batteries (not
supplied).
Replacing batteries
With normal use, the batteries should last for
about six months. When the remote no
longer operates the player, replace all the
batteries with new ones.
continued
GB
23