Danfoss TP5000 User Instructions page 2

Temporary User Overrides
The TP5000 has several useful overrides which can be selected without
affecting the thermostat programming
•
Selection of time or actual room temperature in main LCD display –
press + and – together to change between settings (Fig.11)
• Temporary override of programmed temperature – press ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ until
required temperature is displayed (override will automatically cancel at
beginning of next programmed event) (Fig.12)
• Temporary use of weekend programmes – press ∧ ∧ ∧ ∧ ∧ and ∨ ∨ ∨ ∨ ∨ together
once (override cancels at 2:00am) (Fig.13)
•
Frost Protection – a constant low temperature can be selected whilst
away from home - press ∧ ∧ ∧ ∧ ∧ and ∨ ∨ ∨ ∨ ∨ together twice (Fig.14). To return to
automatic programming press ∧ ∧ ∧ ∧ ∧ and ∨ ∨ ∨ ∨ ∨ together again
Summer Time / Winter Time Clock
To change from Summer to Winter (clocks back) -
G
press and hold - button (Fig.15)
To change from Winter to Summer (clocks forward) -
G
press and hold + button (Fig.15)
Battery Replacement
A low battery symbol will flash in the LCD display (Fig.16)
G
You have 15 days to replace the battery before the unit will switch off.
G
When changing batteries, remove old batteries and insert new ones within
G
ONE MINUTE and programming will not be lost.
NB. If the display ever goes blank during normal operation, the batteries will
need to be renewed, the unit reset and the time and programmes reset.
Selection of time
Fig.11
or actual room
temperature
in main LCD
Temporary
Fig.12
override of
programmed
temperature
Fig.13
Temporary use
of weekend
programmes
Fig.14
Frost
Protection
Fig.15
Clocks
back
Fig.16
03 57
Email: danfossrandall@danfoss.com
Website: www.danfoss-randall.co.uk
x 2
Clocks
forward
16
Danfoss Randall Ltd
Ampthill Road
Bedford, MK42 9ER
Tel: 01234 364621
Fax: 01234 219705