Advertisement
Installation Guide
The procedure for installing the management program depends on the operating system
installed on your PC. The following section takes Wi
Connecting the E1550 with a PC
Plug the E1550 into the USB interface of the PC.
Installing the E1550 Management Program
1. Conn
ect the E1550 with the PC.
2. The OS automatically detects and recognizes new hardware and starts the installation
wizard.
N
ote:
If the auto-run program does not respond, find th
Then double-click AutoRun.exe to run the program.
3. Follow the prompts of the installation wizard.
4. After the program is installed, the shortcut icon
displayed on the desktop.
Starting the Management Program
After the E1550 is installed, the management program is launched automatically. Then
every time
the E1550 is connected to the PC, the management program is launched
automatically.
You can also double-click the shortcut icon on the deskt
program.
Uninstalling the Management Program
1. Choo
se Start > Control Panel.
2. Find the management program, and click Add/Remove program to uninstall t
management program.
N
ote:
It is recommended to restart the
management program is comp
Removing th
e E
1. Double-click
displayed.
2. Select the hardware related to the E1550 and click Stop.
3.
When the prompt "It is safe to remove the device" is displayed, remove the E1550.
N
ote:
B
efore removing the E1550, exit the management program.
PC after the un-installation to ensure that the
letely uninstalled.
1550
in the system tray. The Unplug or Eject Hardware interface is
Version: V100R001_01
ndows XP as an example.
e AutoRun.exe file in the driver path.
of the management program is
op to launch the management
Part Number: 31010AMH
he
Advertisement
