Putting It Away
Store in a dry area, at room temperature to avoid freezing.
To Replace the PowerBrush Belt
If the belt should break, to replace:
Remove the screw in the belt cover using a Phillips
1.
Screwdriver.
Take the broken belt out.
2.
Replace the new belt over the 2 belt gears.
3.
Replace the belt cover door.
4.
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.
Tip:
If you do not have the Brush
Cartridge in all the way, the
Dual Powerbrushes will not
rotate. Firmly push the
cartridge in place, while
listening for the "snap" to
know it is in all the way
1.
9