Parts Names - Mitsubishi Electric CITY MULTI PLFY-EP.NEMU-E Series Operation Manual

2. Parts Names

Indoor Unit
Fan steps
Vane
Louver
Filter
Filter cleaning indication
Enter the model setting number for
the indoor unit you want to operate.
* When using a wireless remote controller, input the "model setting number" (refer to the table above) on the wireless remote controller.
• If the outdoor unit is "Simultaneous Cooling and Heating type (Operation mode: Auto is selectable)", input the model setting number in ( ).
• Refer to the installation manual of wireless remote controller for the procedure to set the model of wireless remote controller.
Wired Remote Controller
Controller interface
RETURN SELECT
MENU
4 3
Function buttons
7 8
1 [ON/OFF] button
Press to turn ON/OFF the indoor unit.
2
Press to save the setting.
When the Main menu is displayed, pressing this button will enable/dis-
able the HOLD function.
3 [RETURN] button
Press to return to the previous screen.
4 [MENU] button
Press to bring up the Main menu.
5 Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on
and it will stay lit for a certain period of time depending on the screen.
When the backlight is off, pressing any button turns the backlight on
and does not perform its function. (except for the [ON/OFF] button)
PLFY-EP·NEMU-E
PLFY-EP·NEMU-E1
4 steps
Auto with swing
–
Long-life
2,500 hr
225 (001)
5
6
ON
HOLD
OFF
2 1
9 0
Air outlet
Vane
The functions of the function buttons change depending on the
screen.
Refer to the button function guide that appears at the bottom of the
LCD for the functions they serve on a given screen.
When the system is centrally controlled, the button function guide
that corresponds to the locked button will not appear.
Main display
Fri
83
Room
Cool Set temp. Auto
83
Mode Temp. Fan
7 8 9 0
Menu screen
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
Main display: RETURN
Cursor
7 8 9 0
6 ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks while
the remote controller is starting up or when there is an error.
7 Function button [F1]
Main display: Press to change the operation mode.
Menu screen: The button function varies with the screen.
8 Function button [F2]
Main display: Press to decrease temperature.
Main menu: Press to move the cursor left.
Menu screen: The button function varies with the screen.
9 Function button [F3]
Main display: Press to increase temperature.
Main menu: Press to move the cursor right.
Menu screen: The button function varies with the screen.
0
Main display: Press to change the fan speed.
Menu screen: The button function varies with the screen.
Filter
Air intake
Main menu
Main Main menu
Energy saving
7 8 9 0
Function guide
3