Assembly - WiseLift WLT400 User Manual

NOTE: If you discover a problem at any point during the setup and positioning of your lift table,
stop and contact a WiseLift representative at 1-877-782-2010. To avoid personal injury and/
or product damage, do not plug the unit into the electrical outlet until the problem is corrected
and do not attempt to fix electrical problems by yourself.
The WiseLift Table base has 3 position options. If you are using the wheels, for rolling the
table around, only the center position is used for maximum stability. For fixed locations with a
sofa or lift chair, the left or right positions accommodate either left or right side configurations.
This puts most of the base under the furniture for maximum support and low profile.
The WiseLift Table will be shipped to you in 3 main peices, the table base, column and top. It
is recomended that you place these peices on the floor in the orentation shown in Figure 1.1.
To assemble the WiseLift Table, follow these instructions:
1. Connect the Base to the column with the 2 screws and silver allen wrench provided
(fig. 1.2). Check out the "Change Base Location" section of this manual for more details.
2. Wheels (optional) can be attached with the provided crescent wrench.
WiseLift

ASSEMBLY

Figure 1.1
7