Your Wiselift Table - WiseLift WLT400 User Manual

This section describes the features of your table. Carefully review the function and location of
each item described, and note that the illustrations and option locations shown in this manual
may not reflect the exact model of lift table that you own.
Your WiseLift table USB port operates on standard household current and can be plugged into
any standard 110-volt wall outlet. Use a surge protector with this table.
TABLE PLACEMENT
Your lift table should be placed near a standard electrical outlet on dry, level ground where
there is ample room to allow for proper operation. WiseLift recommends that you have the
assistance of an attendant when positioning the lift table to avoid the possibility of injury when
lifting.
Follow these steps to position the table in a safe manner:
1. Lay the 3 main parts out on the floor similar to figure 1.1
2. Follow the assembly instructions for the table.
4. Plug the power cord into a surge protector and then into an electrical outlet. Do not use
a standard extension cord!
5. Position the low voltage connection cable where it will not be pinched.
WiseLift

YOUR WISELIFT TABLE

6