You can also go to www.wiseliftchair.com to download our function of your Lift Chair. Use WiseLift parts only for all repairs and replacements. user manual.
110-volt wall outlet, although it is recommended to use a surge protector. Your The WiseLift Chair will be shipped to you in 2 peices, the chair seat (Chair base) and the chair chair is also equipped with a dual 9-volt battery back up system. This enables the user to back.
NOTE: If you unplug your lift chair for an extended period of time (more than one hour), remove the batteries from the external transformer. The lift chair will draw power from the batteries even when it is not in use. Figure 1.3 Figure 1.4 WiseLift WiseLift...
“Sit” position first and then the chair will begin to recline to the selected position. The WiseLift remote includes 5 pre-programed positions. From any of these positions, you can also use the Back rest Note: When the chair is lifted, the back rest buttons and the foot rest buttons (Figure 2.3) are...
CUSTOMIZE THE PRESET POSITIONS “SIT” position and then raise your lift chair. The Wiselift chair has 4 preset positions that can be customized to your personal preference: Release the button when the lift chair reaches a height where you can stand up Position 5, Position 4, Position 3 and TV.
DO NOT SIT IN THE CHAIR while it resets. You can also check our “Reset Video” thank can be found on the WiseLift YouTube • Your lift chair is equipped with an internal thermal shutoff switch located inside the page.
Personal injury or fire damage may occur. Includes the motors, back up battery and remote control. WiseLift warrants the electrical parts of the WiseLift chair for a period of three years from the date of original purchase by original consumer.
Page 10
HOW TO GET SERVICE The consumer must, within the applicable time period, contact WiseLift at 1-877-782-2010. Have your part number, invoice or reciept and description of defect ready. Product should be packaged and shipped carefully.
Need help?
Do you have a question about the WL450 and is the answer not in the manual?
Questions and answers