At+Adven Query And Set The Broadcast On/Off Command; At+Advdat Query And Set Broadcast Data Command; At+Advdat1 Query And Set Broadcast Data Command (Not Saved); At+Advintv Query And Set Broadcast Interval Command - Ebyte CC2541 User Manual

Ebyte Electronic Technology Co., Ltd

5.2.7 AT+ADVEN Query and set the broadcast on/off command

Query: AT+ADVEN?
S et: AT+ADVEN=[para]
Note: Valid after disconnection, power off preservation

5.2.8 AT+ADVDAT Query and Set Broadcast data command

Query: AT+ADVDAT?
S et: AT+ADVDAT=[para]
Note: Valid when next broadcast, power off preservation

5.2.9 AT+ADVDAT1 Query and Set Broadcast data command (not saved)

Query: AT+ADVDAT1?
S et: AT+ADVDAT1=[para]
Note: Valid when next broadcast, power off not preservation

5.2.10 AT+ADVINTV Query and Set Broadcast interval command

Query: AT+ADVINTV?
S et: AT+ADVINTV=[para]
Note: Valid when next broadcast, p ower off preservation

5.2.11 AT+IBCNUUID Query and Set iBeacon UUID command

Query: AT+IBCNUUID?
S et: AT+IBCNUUID=[para]
Note: Valid immediately, power off preservation
Copyright ©2012–2019，Ebyte Electronic Technology Co., Ltd
14
Command
+OK=[para]
+OK: S ucceed
+ERR=[NUM]: Error
Command
Command
Command
Command
Response
Response
+OK=[para]
+OK: S ucceed
+ERR=[NUM]: Error
Response
+OK=[para]
+OK: S ucceed
+ERR=[NUM]: Error
Response
+OK=[para]
+OK: S ucceed
+ERR=[NUM]: Error
Response
+OK=[para]
+OK: S ucceed
+ERR=[NUM]: Error
E104-BT01 Usermanual
Parameter
Para:0、1、2 ASCII
roadcast off
0: B
1: Normal broadcast
2: iBeacon broadcast
Parameter
Para: No more than26 bytes HEX
Parameter
Para: No more than26 bytes HEX
Parameter
Para:32~16000 ASCII
E.g.: para=1600
1600*0.625ms=1s
Parameter
Para: 16 bytes HEX