Sony MZ-N10 Notes: installing & operating OpenMG Service Manual page 24

MZ-N10
Adjustment required before Overall Adjustment
Note : Modify five adjusted values through the following proce-
dure before performing the CD overall adjustment and MO
overall adjustment.
• Adjusted values modifying procedure
1. Select manual mode of the test mode, and set item number
822 (see page 12).
Remote commander LCD display
822
###S
** : Adjusted value
[VOL +]
2. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
03.
3. Press the X key to write the adjusted value.
4. Select manual mode of the test mode, and set item number
870 (see page 12).
5. Press the > key to set item number 875.
Remote commander LCD display
875
###S
** : Adjusted value
[VOL +]
6. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
3E.
7. Press the X key to write the adjusted value.
8. Press the > key to set item number 876.
Remote commander LCD display
876
###S
** : Adjusted value
[VOL +]
9. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
00.
10. Press the X key to write the adjusted value.
11. Press the > key to set item number 881.
Remote commander LCD display
881
###S
** : Adjusted value
[VOL +]
12. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
37.
13. Press the X key to write the adjusted value.
14. Press the > key to set item number 882 .
Remote commander LCD display
882
###S
** : Adjusted value
[VOL +]
15. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
E0.
16. Press the X key to write the adjusted value.
24
**
[VOL --]
**
[VOL --]
**
[VOL --]
**
[VOL --]
**
[VOL --]
Overall Adjustment Mode
• Configuration of overall adjustment mode
Overall adjustment mode
(Title display)
"Assy**"
Continuing overall adjustment
key
.
key
>
key or
N
key
u
on the remote commander
Jog dial (down) or
[DISPLAY]
key
on the remote commander
Jog dial (up) or
[P MODE]
key
on the remote commander
[GROUP]
key or
key
on the remote commander
key
x
CD overall
adjusting
MO overall
adjusting
Automatic
Disc
discrimination
overall
adjustment
Electrical
offset
adjustment
Temperature
correction
and
Power supply
adjustment
auto item feed
NV reset
(item number 21)