Structural Checks; Disposal - Losma Darwin 600 Series Instruction Manual

6.5. Structural checks

•
Each year:
Check that the nuts of the anti-vibration joints are firmly tightened.
•
Every 2 years:
Check the condition of the safety tie rods.
Check the good condition of the Darwin shell.
•
Every 4 years:
Replace the anti-vibration joints.

7. Disposal

Danger!
Solely adequately trained and equipped personnel must carry out the machine disconnection and disposal
operations.
The used filters, the internal parts in rubber and all components with oil residuals are special waste to be disposed through
authorized organizations.
To allow for the reutilization of the raw materials it is also advisable to separate:
•
The metal parts.
•
The electric motor.
•
The rubber parts.
•
The synthetic material parts.
Note
LOSMA S.P.A. does not assume any responsibility for damage to persons or things resulting from reutilization of individual
parts of the machine for operations or in assembly condition others than the original ones for which the machine was
designed.
36
EN