Labeling A Cd; Disc Memo - Sony MDX-C8900R Operating Instructions Manual

Erasing tracks in a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC
PLAY MODE
"P 1" indicates Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
To select Programme 2, press (5) (n)
repeatedly until "P 2" appears.
2
Press (2) ( N) or
track you want to erase.
DISC
EN
PLAY MODE
The track currently registered in slot 6 of
Programme 1.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DISC
PLAY MODE
DISC
PLAY MODE
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press
(PLAY MODE) for two seconds.
6
Press (SHIFT).
32
TRACK
ENTER
(5) ( n) to select the
Track slot number
TRACK
ENTER
TRACK
ENTER
µ
TRACK
ENTER

Labeling a CD

(CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 34) and select the specific
tracks for playback (page 34).
1
Play the CD and press
seconds.
DISC
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired
(A n B n C n ··· Z
··· 9 n + n –
n . n _ )
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (5) ( n) after locating the
desired character.
The flashing cursor moves to the next
space.
(4)
If you press (2) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (PTY/LIST) for two seconds.

— Disc Memo

(PTY/LIST) for two
characters.
n 0 n 1 n 2 n
n * n / n \ n > n <
DISC
DISC