Creating A Programme; Md Programme Memory - Sony MDX-C8900R Operating Instructions Manual

Creating a programme

— MD Programme Memory

You can play the tracks in any order you want
by creating and storing programmes in the
unit's memory. You can make two
programmes: Programme 1 and Programme 2.
You can select up to 12 tracks for each
programme. You can store the programmes in
memory.
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
TRACK
PLAY MODE ENTER
"P 1" indicates Programme 1 is selected.
To select Programme 2, press (5) (n)
repeatedly until "P 2" appears.
2
Push the SEEK/AMS control up or down
to select the track you want.
3
Press (6) (ENTER) momentarily.
PLAY MODE ENTER
µ
TRACK
PLAY MODE ENTER
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish selecting tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Notes
• "*Wait*" appears in the display while the unit is
reading the data.
• "*Mem Full*" appears in the display when you
try to enter more than 12 tracks into a
programme.
Playing the stored programme
You can select:
•PGM 1 – to play Programme 1.
•PGM 2 – to play Programme 2.
•PGM 1+2 – to play Programmes 1 and 2.
1
Press (SHIFT).
2
Press (4) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (5) (n) repeatedly until the
desired programme appears.
Programme 1 playback
PGM1
PLAY MODE
µ
Programme 2 playback
PGM 2
PLAY MODE
µ
Programmes 1 and 2 playback
PGM1+2
PLAY MODE
µ
Normal playback
PLAY MODE
Play starts in the selected programme play
mode.
4
Press (SHIFT).
To return to normal playback mode, select
"PGM off" in step 3 above.
Notes
• "No data" appears in the display if no track is
stored in the programme.
• "Not ready" appears in the display if a disc that
has no programmed tracks is inserted.
EN
11