Makita DUP361 Technical Information page 28

Battery powered pruning shears

Hide thumbs Also See for DUP361:

P28 / 29

Data reading screen

By tapping "Save Data" use-history information is saved in your terminal. Saved data in your terminal

can be checked by PC. When you check them by PC, connect the terminal to PC through USB and

copy to PC from your terminal.

But be careful because preparations of following are necessary to check with PC.

Preparations 1:Set up option for developers

When you tap "build number" in "set up" – About phone" 7 times, optional set up for developers will

be enabled. Validate "USB-debugging" in "set up" - "option for developers" .

Preparations 2：Installation of the driver to PC

Connect your terminal with PC through USB and install driver.

Please refer to the instruction manual of your terminal concerning the installation of the driver.

Preparations 3：Update of save data

To restart the terminal is necessary to display saved data on your PC.

If you check data on PC after saving in your terminal, restart every time.

Table of Contents