Makita DUP361 Technical Information page 20

2) When you attach battery to the machine, use full-charged battery if possible.
3) Sound at the detect of NFC and sound at the communication completion vary according to the set
up method of each terminal or there may be no sound.
1-5.DUP361 Battery holder Position : to be held your terminal over Battery holder
Bring antenna of your terminal to
You can
terminal on
holder directly.
1-6 Preparation of UP361D
Be sure that Switch is off.
Preparation of your terminal
アプリを起動
Apps name is Makita Tools
(NFC mark) closer at Battery holder of UP361D
put your
Battery
Attach Battery.
Screen while communicating
NFC mark
Connect Cord with Machine.
Swich is now on
.
P20 / 29