Sony MDS-PC3 M-crew Service Manual page 25

Adjustment flow
Start
Replace IC195
NO
Replace OP or IO195
NO
Replace IC101, IC195, or D101
NO
Replace OP, IC190, or IC195
NO
Replace OP, IC102, IC190,
or IC195
NO
Replace OP, IC101, IC151,
or IC195
NO
Replace OP
NO
Replace the spindle motor
NO
5-6-4. Auto Check
(See page 28)
End adjustments
After turning off and then on the power,
YES
initialize the EEPROM
For details, refer to 4-11. WHEN MEMORY NG IS
DISPLAYED (See page 23)
YES 5-7. INITIAL SETTING OF ADJUSTMENT VALUE
(See page 30)
YES
5-9. TEMPERATURE COMPENSATION OFFSET
ADJUSTMENT (See page 30)
YES
5-10. LASER POWER ADJUSTMENT (See page 30)
YES
5-11. Iop NV SAVE (See page 31)
5-12. TRAVERSE ADJUSTMENT (See page 31)
YES
5-13. FOCUS BIAS ADJUSTMENT (See page 32)
5-16. AUTO GAIN CONTROL OUTPUT LEVEL
ADJUSTMENT (See page 33)
YES
OP change in Err Display mode
Iop write
YES
Spdl change in Err Display mode
• Abbreviation
OP: optical pick-up
25