Dme Arc Sequence (Gx50/60 Only); Auto Obs Crossing Holding Waypoint; User Database Memory Loss; Flight Plan Memory Loss - II Morrow Apollo GX 50 User Manual

Message Function
144

DME Arc Sequence (GX50/60 Only)

This form of Sequence Alert is provided when the
next TO waypoint is the end of a DME Arc in a
nonprecision approach. Press ENTER to transition
directly to the NAV mode DME Arc Assist page.
Sequence Alert
DME Next-Use ARC
Assist? Enter

Auto OBS Crossing Holding Waypoint

When a waypoint on hold is crossed to the From side
the first time, the following message is provided. This
message is not created when you cross the MAP. If
you press ENTER, the OBS Desired Track screen is
displayed. This message does not become an old
message after viewing.
Push ENTER to
set OBS Course;
NAV/MAP to Exit

User Database Memory Loss

This message indicates that one or more user
waypoints or user-defined comments had a checksum
error. This message is cleared after the message is
viewed.
User Database
Memory Loss:
2 Deleted

Flight Plan Memory Loss

This message indicates that one or more flight plans
had a checksum error. This message is cleared after
the message is viewed.
Flight Plan
Memory Loss
1 Deleted