Features - Sony UWP-C1/C2 Operating Instructions Manual

Features

Features
Each of the UWP-C1/C2/S1/S2/X1/
X2 wireless microphone packages
(referred to as the UWP series
hereafter) combines a transmitter
(body-pack transmitter (UTX-B1) or
hand-held microphone (UTX-H1)) and
a receiver (portable diversity tuner
(URX-P1), half-rack size diversity
tuner (URX-R1), or diversity tuner
module (URX-M1)). The UWP series
can be used with a compact camcorder
for ENG (Electronic News Gathering)
purposes, and with a powered mixer
for AV presentations or as a PA
(public address) system.
Note
The UWP series is not compatible
with conventional WRT series
transmitters, WRR series tuners, or
WRU series tuner units.
The features of each package are
described below.
UWP-C1
Body-pack transmitter (UTX-B1)
This is a small and lightweight
transmitter with a crystal-controlled
PLL (phase lock loop) synthesized
system and a BMP-type microphone
input connector. The RF power output
can be set at 10 mW or at 2 mW.
10
Portable diversity tuner
(URX-P1)
This tuner employs a space diversity
system with little signal dropout and
two angle-adjustable antennas. It
comes with an adapter for mounting
the tuner on the compact camcorder
(DSR-PDX10/PDX10P/PD150/
PD150P, etc.).
UWP-C2
Hand-held microphone (UTX-H1)
This microphone is equipped with a
built-in antenna and a unidirectional
dynamic microphone unit. The RF
power output can be set at 10 mW or
at 2 mW.
Portable diversity tuner
(URX-P1)
This tuner employs a space diversity
system with little signal dropout and
two angle-adjustable antennas. It
comes with an adapter for mounting
the tuner on the compact camcorder
(DSR-PDX10/PDX10P/PD150/
PD150P, etc.).
UWP-S1
Body-pack transmitter (UTX-B1)
This is a small and lightweight
transmitter with a crystal-controlled
PLL (phase lock loop) synthesized
system and a BMP-type microphone
input connector. The RF power output
can be set at 10 mW or at 2 mW.