Introduction
The Microclock development kit is designed to support the 5X1503/5L1503 devices. It provides a convenient way of verifying, configuring
and programming the blank parts for Microclock devices 5X1503 and 5L1503. The IDT
for configuration and frequency validation on a socket board through a USB programmer board in USB interface. The development kit
support programming to Microclock blank parts either placed into a socket of the board or the blank device soldered on evaluation boards
as additional extension boards.
Table 1. 5X1503/5L1503 Family of Products
Product
5X1503
1.8V integrated with an internal 52MHz crystal (standard 5X1503).
5L1503
1.8V using an external crystal (standard 5L1503).
5X1503L
1.8V integrated with an internal 52MHz crystal, low output swing at channel 1.
5L1503L
1.8V using an external crystal, low output swing at channel 1.
5X1503S
1.8V integrated with an internal 52MHz crystal. (support spread spectrum clock).
5L1503S
1.8V using an external crystal. (support Spread spectrum clock).
Limit of VCO for Each Microclock Device
▪
For standard 5X1503 / standard 5L1503:
•
F
: 50MHz – 130MHz
VCO
▪
For 5X1503L / 5L1503L:
•
F
: 50MHz – 130MHz
VCO
▪
For 5X1503S / 5L1503S:
•
F
: 500MHz – 1100MHz
VCO
Socket Board Overview
The Microclock socket board builds in with a Microclock evaluation part (standard 5X1503 product) with all of the necessary components
and connections to test the functionality of the configuration. Users can use the evaluation part for configuration. Once the configuration
is final, users can either place blank parts in the socket or connect to a separated evaluation board with a soldered blank part for
programming.
Use
Figure 1
and
Table 2
to identify board items and features.
©2019 Integrated Device Technology, Inc.
®
Microclock
5X1503/5L1503 Family Development Kit
User Guide
Description
Timing
Commander™ GUI supports to the devices
1
Package
10-DFN
10-DFN
10-DFN
10-DFN
10-DFN
10-DFN
July 8, 2019