Advertisement
Memory Full Indication
When the memory of the monitor is full, the yellow MEM light will lash 10 times at the end of the last
event recording and beep three times. Please contact us to transmit recorded events at this time.
If you attempt to record further events, an error message will sound accompanied by three lashes of
the yellow MEM light.
The monitor will not record until the memory is cleared.
NOTE:
Low Battery Indication
A low battery is indicated by the red BAT light lashing 10 times accompanied by three beeps at the end
of an ECG recording or transmission. Contact us at 888.500.3522 to request a replacement battery.
•
Locate the battery door on the back of the monitor.
•
Slide the battery cover of by pressing down and away
from the monitor in the direction of the arrow.
•
Remove the battery and wait 10 seconds.
With the writing visible, place the new battery into the
•
holder underneath the clips.
•
The monitor will beep 3 times. Completely slide the battery
door back into the monitor.
6
battery door
battery clips
Advertisement
