Recording An Event - Preventice Solutions IMD Post Event Patient Instruction Manual

Recording an Event

1. At the irst sign of a symptom, place the
monitor's electrode feet evenly against your bare
chest in the proper location as in the diagram to
the right.
2. Press the EVENT button.
3. The yellow MEM light will turn to a solid ON
status to indicate recording and tones will
sound to let you know the monitor is recording
properly.
4. Hold as still as possible during the recording but
continue breathing normally. Hold the monitor
on your chest until the tones stop, approximately
60 seconds.
5. Once the tones stop and the yellow MEM light
turns OFF, you may remove the monitor from
your chest.
4