Monitoring The Recording - Sony ICD-PX720 Operating Instructions Manual

To Do this
pause Press
recording* During recording pause, the
operation indicator flashes
in red and "PAUSE" flashes in
the display window.
release pause Press
and resume Recording resumes
recording from that point. (To stop
recording after pausing
recording, press
review the Press
current Recording stops and
recording playback starts from the
instantly beginning of the message
just recorded.
review during Press and hold

recording –
recording pause. Recording
stops and you can search
backwards while listening
to fast playback sound.
After you release –
playback starts from that
point.
* One hour after you pause recording,
recording pause is automatically released
and the IC recorder enters the stop mode.

REC/PAUSE.
 REC/PAUSE again.

(stop).)
 PLAY/STOP•ENTER.
during recording or

,

Monitoring the recording

Connect commercially available

headphones to the
jack and monitor the recording. You
can adjust the monitoring volume by
pressing VOL + or –, but the recording
level is fixed.
Remaining memory indication
During recording, the remaining memory
indicator decreases one by one.
The memory is
nearly full.
When the remaining time of recording
reaches 10 minutes, the last one of the
indication flashes.
If the remaining recording time display
mode is selected, the remaining
recording time display will also flash
when the remaining time reaches 1
minute. The display will be changed
automatically to the remaining time
display.
When the memory is full, recording
automatically stops and
will flash in the display window three
times. To continue recording, first erase
some of the messages.
(headphone)
Flashing
and "FULL"
1
GB