Disconnecting The Ic Recorder From The Ac Outlet - Sony ICD-PX720 Operating Instructions Manual

Disconnecting the IC
recorder from the AC outlet
Follow the procedures below; otherwise,
data may be damaged.
1
If you are recording or playing back
a message, press  (stop) to put the
IC recorder into the stop mode.
2
Make sure that the operation
indicator is not flashing.
3
Disconnect the USB AC adaptor
from the AC outlet, then disconnect
the USB connecting cable from the
USB AC adaptor.

GB

Notes
During recording (the operation indicator

lights or flashes in red) or accessing data (the
operation indicator flashes in orange),
the IC recorder should not be connected

to or disconnected from the USB AC
adaptor connected to the AC outlet.
the USB AC adaptor connected to the IC

recorder should not be connected to or
disconnected from the AC outlet.
Doing so may damage the data. If the
IC recorder is required to process a large
amount of data, the start-up window may
be displayed for an extended period of time.
This is not a malfunction of the IC recorder.
Wait until the start-up display disappears
from the display window.
While a USB AC adaptor (not supplied) is

being used, the battery indicator does not
appear in the display window.