The Timer Setting The Clock - Sony CFD-E90L Operating Instructions Manual

The Timer
Setting the clock
"– –:– –" indication appears in the display
until you set the clock.
CLOCK/SLEEP/TIMER
ENTER
Before you set the clock, connect the power
source (see page 23).
1
Hold down CLOCK/SLEEP/TIMER
until "CLOCK" appears in the display.
The hour digit flashes.
2
Turn the jog dial to set the current hour.
Then press ENTER.
The minute digits flash. Set the minutes
by turning the jog dial until the correct
minute is displayed.
3
Press ENTER.
The clock starts from 00 seconds.
Tip
The time display system:
CFD-E90: 12-hour system
Jog dial
CFD-E90L: 24-hour system
GB
19