The Timer Setting The Clock - Sony CFD-E70L Operating Instructions Manual

The Timer
Setting the clock
"– –:– –" indication appears in the display
until you set the clock.
MENU
ALARM Jog dial
Before you set the clock, connect the power
source (see page 24).
1
Press MENU•ALARM until "CLOCK"
appears in the display, then press
DSPL•ENT MEM.
The hour digit flashes.
2
Turn the jog dial to set the current hour.
Then press DSPL•ENT MEM.
The minute digits flash. Set the minutes
by turning the jog dial until the correct
minute is displayed.
DSPL
ENT MEM
3
Press DSPL•ENT MEM.
The clock starts from 00 seconds.
Tip
The time display system:
CFD-E75: 12-hour system
CFD-E70L/E75L/E77L: 24-hour system
GB
19