Step 2: Preparing A Power Source - Sony 4-166-309-11(1) Operating Instructions Manual

Step 2: Preparing a Power Source

Remove the film on the display window
before you use the IC recorder.
Slide and lift the battery compartment lid,
insert LR03 (size AAA) alkaline batteries
with correct polarity, and close the lid.
If the battery compartment lid is
accidentally detached, attach it as
illustrated.
Tips
z
• When replacing the batteries, messages
recorded or alarm settings are not erased
even when you remove the batteries.
• When replacing the batteries, the clock
continues moving for a certain period of time
after you remove the batteries.
P Notes
• Do not use manganese batteries for this IC
recorder.
• When replacing the batteries, be sure to
replace both batteries with new ones.
• Do not charge dry batteries.
• When you are not going to use the IC
recorder for a long time, remove the batteries
to prevent damage from battery leakage and
corrosion.
Clock setting display appears and the year
section flashes when you insert batteries for
the first time, or when you insert batteries
after the IC recorder has been without
batteries for a certain period of time. See
"Setting the clock after preparing a power
source" on page 12 to set the date and time.
9 GB