Sony 4-166-309-11(1) Operating Instructions Manual page 83

Sony ic recorder operating instructions
Table of Contents

Advertisement

Symptom
The operation indicator does
not light.
"FULL" is displayed and
you cannot start recording.
"FULL" is displayed and
you cannot operate the IC
recorder.
Recording is interrupted.
Noise is heard.
Recording level is low.
Remedy
• "LED" is set to "OFF." Display the menu and set "LED" to "ON"
(page 57).
• The memory is full. Erase some of the messages (page 20) or
erase all the messages after you store them on your computer.
• 99 messages have been recorded in the selected folder or 495
messages (when there are 5 folders) in total have been recorded.
Therefore you cannot record another message, or move a message.
Erase some of the messages (page 20) or erase all the messages
after you store them on your computer.
• The VOR function is activated. Set "VOR" to "OFF" in the menu
(page 24).
• An object, such as your finger, etc., accidentally rubbed or
scratched the IC recorder during recording so that noise was
recorded.
• The IC recorder was placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or playback.
• Plug of the connected microphone was dirty when recording.
Clean the plug.
• The
(headphones) plug is dirty. Clean the plug.
i
• "SENS" (microphone sensitivity) is set to "
menu and set "SENS" to "
." Display the
" (page 23).
83
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icd-px820Icd-px820d

Table of Contents