Making The Human Voice Clearer - The Noise Cut Function - Sony 4-166-309-11(1) Operating Instructions Manual

Playing back a specified section
repeatedly – A-B Repeat
1
During playback, press
to specify the starting point A.
"A-B B" flashes.
2
Press (repeat) A-B again to specify
the finishing point B.
" " and "A-B" is displayed and the
specified section is played back
repeatedly.
To resume normal playback:
Press PLAY/STOP•ENTER.
N
To stop A-B Repeat playback:
Press x (stop).
To change the segment specified for A-B
Repeat playback:
During A-B Repeat playback, press
(repeat) A-B again to specify a new
starting point A. Then specify a new
finishing point B, as in step 2.
P Note
You cannot specify the finishing point B
before the starting point A that has been set.
Making the human voice
clearer – the noise cut
function
(repeat) A-B
When the noise cut function is set to "ON"
in the menu, the distortion of very low and
high frequencies which are outside the
human voice range is reduced, therefore
you can hear the human voice more clearly.
1
N PLAY/
STOP•ENTER
FOLDER/MENU
x
– . , >
Press and hold FOLDER/MENU to enter
the menu mode when the IC recorder is
in the stop or playback mode.
+
39 GB