Using The Optional Battery - Sony 1080i Operating Instructions Manual

Sony digital hd videocassette recorder operating instructions 1080i
Hide thumbs Also See for 1080i:
Table of Contents

Advertisement

Using the optional battery

Charging the optional battery
Attach the optional "InfoLITHIUM" Battery (L series)
to the unit and charge the battery.
"InfoLITHIUM" L series battery packs have the
mark.
"InfoLITHIUM" is a trademark of Sony Corporation.
1
Attach the battery with the power turned off.
2
Connect the power cord and AC adaptor using the
procedure in "Preparing the Power Supply".
The CHG (charge) lamp will light and charging
starts.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacture.
Appendix
BATT RELEASE
(battery release) button
Note
The battery cannot be charged while the power is ON.
When charging is completed
The CHG (charge) lamp turns off (full charge).
Unplug the AC adaptor from the DC IN jack.
To remove the battery pack
Slide the battery pack out while pressing the BATT
RELEASE button.
Checking the remaining battery power
– BATERRY INFO
You can check the battery charge level and the time
available for playback with this charge level by
pressing the DISPLAY/BATT INFO button during
charging or while the unit is turned off.
The battery information is displayed for approximately
7 seconds. If you press and hold the DISPLAY/BATT
INFO button, the battery information is displayed for
approximately 20 seconds.
BATTERY INFO
BATTERY CHARGE LEVEL
1
PLAY TIME AVAILABLE
LCD SCREEN ON
LCD SCREEN OFF
1 BATTERY CHARGE LEVEL: Approximate
remaining battery power
2 Remaining playback time when the LCD ON/OFF
switch is turned on
3 Remaining playback time when the LCD ON/OFF
switch is turned off
2
435 min
500 min
3
65
Appendix

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-m10uHvr-m10nHvr-m10eHvr-m10p

Table of Contents