Main Functions - Büttner Elektronik Batterie-Computer MT iQ BasicPro Instruction Manual

Main Functions

Use button to switch between the main displays of the
u
EN
battery computer.
Successively displayed will be: capacity display in ampere-
hours (Ah), capacity display in percentage (%), remaining
time display in hours (h), battery voltage in Volts (V), current
in Amperes (A).
So that you always have all informations at a gance, the
remaining values are displayed in the four corners, depending
on the actual main display .
w
The current display in amperes (A) is negative "-" when
power is drawn from the battery. When charging, the value
is positive. Instead of the remaining time display in hours,
this symbol then appears ">>>" which indicates you the
charging process.
If the battery capacity of PB, Gel or AGM reaches a critical
value below 30 percent, the display starts flashing as
a warning and remains at the displayed 30 percent. For
LiFePO this threshold is 20 percent. These values can not
4
be changed.
BÜTTNER ELEKTRONIK – MT iQ Basic 31
Pro