Settings - Büttner Elektronik Batterie-Computer MT iQ BasicPro Instruction Manual

Settings

Your battery computer is equipped with a so-called remai-
ning time. This gives you reliable information about how
EN
long the battery capacity is still sufficient to operate your
consumers. For this purpose, the MT iQ Basic determines
Pro
the current consumption and sets this in relation to the
remaining capacity. For the correct calculation, it is
necessary to set the battery type and the nominal capacity
of the battery properly.
Pressing push-button for 5 seconds will enter the setup
u
menu.
First, please set the battery type. To do this, activate the
setup menu as described above. The field "Back" is high-
lighted in black. Press the push-button to scroll through
u
the menu until "BatTyp" appears in black and then again
press push-button for 5 seconds. The display jumps to
u
battery type on the right side (factory default Pb). Briefly
press push-button there repeatedly until your installed
u
battery type is displayed.
Pb = lead-acid battery
Gel = gel battery
AGM = AGM battery
LiFePO = lithium battery
4
Now release push-button and wait about 10 seconds.
u
The battery type setting now is done and stored erratically.
28 BÜTTNER ELEKTRONIK – MT iQ Basic
Pro